EEnngglliisshh
EENN
1-32 KK-7100 REV 02 www.stryker.com
Operation
Inserting or removing a cassette from the X-ray cassette holder (option)
(Continued)
X-ray guide dimensions: 390 mm x 660 mm x 16 mm
The recommended X-ray cassette dimensions are:
• 385 mm x 385 mm x 15 mm
• 460 mm x 383 mm x 15 mm
To insert an X-ray cassette:
1. See Removing or replacing the headboard on page 1-22.
2. Slide the X-ray cassette into the X-ray cassette holder.
3. Adjust the patient to the desired position.
To remove an X-ray cassette:
1. Slide the X-ray cassette out of the X-ray cassette holder.
2. See Removing or replacing the headboard on page 1-22.
To Next Page
Loading...
Need help?
General
