Strymon CONDUIT User Manual

Conduit - MIDI Hub
pg 14
Connections – Connecting Two Pedals to a Single 1/4"
TRS Jack (cont.)
Configure the connected pedals to receive MIDI via TRS on the
desired MIDI channel.
(See your pedal’s user manual for detailed instructions.)
4
NOTE: This mode disables bidirectional communication with
the connected pedals - the connected pedals will only receive
MIDI data.
Connect the other ends of the TRS splitter cable to the 1/4" MIDI
jacks on the desired pedals.
3
9VDC
MIDI OUT MIDI IN
USB
SET

Strymon CONDUIT Specifications

General

Brand	Strymon
Model	CONDUIT
Category	Switch
Language	English