Strymon CONDUIT - Configuring 1;4 TRS Jacks for Non-Strymon Pedals; Step 1: Enter Configuration Mode

Conduit - MIDI Hub
pg 8
Configuring 1/4" TRS Jacks for Non-Strymon Pedals
Press and hold the SET button while connecting power to Conduit
to enter TRS jack configuration. All five LEDs will blink to indicate
TRS jack configuration. The four 1/4" TRS jack LEDs will blink
with a color indicating their current configuration:
GREEN = Tip Send
RED = Ring Send
AMBER = Tip and Ring Send
PURPLE = TRS TYPE A
PRESS AND HOLD
1
9VDC
MIDI OUT MIDI IN
USB
SET