Strymon CONDUIT - Front Panel Controls and Connections; DIN MIDI IN;OUT Ports

Conduit - MIDI Hub
pg 4
Controls and Connections – Front Panel
9VDC
MIDI OUT MIDI IN
USB
SET
DIN MIDI IN/OUT Ports
The 5-pin DIN MIDI IN port receives MIDI data from an external source
such as a MIDI controller or MIDI interface. Data is sent to all four 1/4"
TRS jacks and the DIN MIDI OUT port when Conduit is powered via
9V DC connection. All MIDI data sent back from 1/4" TRS connected
pedals is merged and sent to the MIDI OUT port when Conduit is not
connected to a computer via USB.
NOTE: When USB is connected, MIDI data received at the 1/4”
jacks from the connected pedals and from the DIN MIDI IN is sent
to the connected computer via its own independent MIDI port and
is no longer merged to the MIDI OUT port.
(See page 15 for details.)