Strymon CONDUIT - Configuring TRS Jacks: Steps 2 & 3; Step 2: Change Jack Configuration; Step 3: Save and Exit Configuration

Conduit - MIDI Hub
pg 9
Configuring 1/4" TRS Jacks for Non-Strymon Pedals (cont.)
Release the SET button. To change the jack configuration, plug
a cable into the desired jack and then unplug it. The LED color
will change to indicate the new configuration mode.
GREEN = Tip Send
RED = Ring Send
AMBER = Tip and Ring Send
PURPLE = TRS TYPE A
Once all TRS jacks are configured, press the SET button to save
and exit the TRS jack configuration.
2
3
MIDI OUT MIDI IN
USB
SET
9VDC
9VDC
MIDI OUT MIDI IN
USB
SET