10
SN 94770 - ...
1
1
Stûv 30-compact - installation [en] - 01/13
On taking delivery of the equipment
INSTALLATION
On taking delivery of the equipment
Please note !
The paint is not oven baked and is
therefore relatively fragile but will
harden after being heated a few
times. Handle the system with care
when installing.
Moving
While the stove is still packaged, you
can use a pallet loader or a hand-lift
truck [photo 1]. Move it close to its
final position.
If you are unable to transport
the stove on its pallet to its final
position, please observe the following
unpacking instructions.
Please note !
Check that the stove has not suffered
any damage during delivery. The
guarantee only covers damage due to
transportation if it is indicated on the
delivery slip.
Complaints
If you wish to make a complaint,
always quote the serial number visible
on the stove in the closed-door
position [photo 1].
Accessories
– flue and upper connection
– ground plate
– barbecue kit
– kit for rear outside air intake
If any of these accessories have been
ordered, they will be found around
the stove or its packaging. Check that
you have received them.
To Next Page
Loading...
