Style selections SSD24TR - Key Setings; Remote Control Operation; Shutting off Heater

26
REMOTE CONTROL OPERATION
This appliance must not be used with glass
doors in the closed position. This can lead to
pilot outages and severe sooting outside the
replace.
The transmitter operates on a (2) 1.5V AAA
batteries.
KEY SETINGS
ON - Operates unit to on position, Manually
operated solenoid ON.
OFF - Operates unit to off position, Manually
operated solenoid OFF.
MODE - Changes unit from manual mode to
thermo mode.
SET - Sets temperature in thermo mode.
Figure 40 - Transmitter
Figure 41
MATCH LIGHTING INSTRUCTIONS
1. Remove any items necessary for easy access to the pilot (for example: logs,
screens, etc.).
2
. Follow appropriate lighting instructions found previously. Instead of pushing the
piezo button, light a match and hold the ame to the end of the pilot and ignite
the pilot.
3.
After control knob has been released and pilot stays lit, reinstall any items that
were removed for pilot access.
4.
Call a qualied service technician for repair or replacement of the piezo ignitor.
TO TURN OFF GAS TO APPLIANCE
Shutting off heater
1. Press the OFF button to let pilot stay.
2. Turn gas control knob clockwise to OFF position to shut off burner.