Troubleshooting Guide
Model 315I (UC Ice Maker)
7-2
#3757320 - Revision B - August, 2005
TROUBLESHOOTING GUIDE
This section of the manual contains the Troubleshooting Guide which will help the Service Technician troubleshoot a
model 315I.
How to Use the Troubleshooting Guide
3
The list below indicates how the Troubleshooting Guide is arranged. Identify the description of the problem that the
unit is experiencing from the list and go to the page indicated. To the left of the problem description is a letter.
Locate that letter in the left column of the Troubleshooting Guide. The center column will identify the possible caus-
es for the problem. And, the information in the right column will explain what tests to perform in order to determine if
what you are checking is the cause and/or what action to take to correct the problem.
Troubleshooting Guide Layout
Page #
A. Ice machine does not operate ........................................................................................................................... 7-3
B. Ice machine operates, but will not make ice ..................................................................................................... 7-3
C. Ice machine operates, makes ice, but cubes do not release from mold .......................................................... 7-4
D. Ice machine operates, makes ice, but does not fill bin ................................................................................... 7-5
E. Cubes are too big ............................................................................................................................................. 7-5
F. Cubes are too small ......................................................................................................................................... 7-5
G. Cubes are partially formed - ragged edges ...................................................................................................... 7-5
To Next Page
Loading...
