EasyManua.ls Logo

Sub-Zero 315I - Section 8 - T Echnical Data Tables; Bin Capacity & Ice Production; Electrical Information; Sealed System Information

Sub-Zero 315I
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Data
Model 315I (UC Ice Maker)
8-2
#3757320 - Revision B - August, 2005
Bin Storage Capacity
BIN CAPACITY AND ICE PRODUCTION
26 lbs
Ice Production (24 Hours) 18 - 30 lbs
Refrigerant Charge (134a)
SEALED SYSTEM INFORMATION
5 oz.
Approximate Low Side Pressure (at End of Freeze Cycle) 1 - 5 psi
Approximate High Side Pressure (at End of Freeze Cycle) 125 - 150 psi
Unit Average Running Amperage
ELECTRICAL INFORMATION
4 amps
Compressor Horse Power 1/8 hp
Compressor LRA (Locked Rotor Amps) 18.5 amps
Compressor Start Winding Resistance 11 - 13 ohms
Compressor Run Winding Resistance 2 - 4 ohms
Hot Gas Valve Coil Watts / Resistance 6.9 watts / 2069 ohms
Cycle Timer Motor Watts / Resistance 3 watts / 4800 ohms
Condenser Fan Motor Watts / Resistance 3 watts / 480 ohms
Water Valve Coil Watts / Resistance 15 watts / 960 ohms
Circulating Spray Pump Watts / Resistance 180 watts / 80 ohms
Drain Pump Watts / Resistance 150 watts / 96 ohms
Cube Size Control Cut-in / Cut-out Temps (“NORMAL” setting) 6°F(-14°C) / 12°F(-11°C)
.2 gpm
WATER VALVE FLOW RATE

Table of Contents

Other manuals for Sub-Zero 315I

Related product manuals