Standard Handle Lengths
ALL REFRIGERATOR / ALL FREEZER / SIDE-BY-SIDE MODELS
Tubular Handle 1622 mm
Pro Handle 1146 mm
Curved Handle 1464 mm
Stud Spacing 1114 m
m
ICBBI-30U and ICBBI-30UG DOOR DRAWER
Tubular Handle 1124 m
m
633 m
m
Pro Handle 952 m
m
533 m
m
Curved Handle 1148 m
m
641 m
m
Stud Spacing 921 m
m
414 m
m
ICBBI-36U and ICBBI-36UG DOOR DRAWER
Tubular Handle 1124 mm 770 mm
Pro Handle 952 mm 597 mm
Curved Handle 1148 mm 796 mm
Stud Spacing 921 mm 567 mm
Built-In Accessories 3
1
Accessories. T
hese optional accessories are available for built-in models. Be aware that some accessories can not be
used with every model. Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit
the Showroom Locator section of our website, subzero.com.
• Front panels for flush inset application in classic,
platinum and carbon stainless steel with tubular,
curved and pro handles.
• Panel and stainless steel grilles for 2108 mm and
2235 mm overall heights. Built-in models come stan-
dard with a grille for an 2134 mm overall height of the
unit.
• Side panels in white and classic stainless steel.
• Custom side panel mounting kit.
• Decorative stainless steel handles available in tubular,
curved and pro styles in a variety of lengths. For
standard handle lengths, refer to the chart.
• Retrofit kits for use with 600 series panels. Allows for
existing 600 series panels to be used on a new built-in
model—not available for Models ICBBI-36R,
ICBBI-36RG, ICBBI-36F, ICBBI-30UG, ICBBI-36UG,
ICBBI-42SD and ICBBI-48SD.
• Dual installation kit for use when placing units side by
side. Kits available with or without the dual wide grille
assembly.
s
ubzerotrade.com
To Next Page
Loading...
