Sub-Zero CBIC-18FI Installation Guide

2 | English subzero.com | 3
Product Information
Important product information including the model and
serial number are listed on the product rating plate. For
column models, the rating plate is located inside the middle
drawer near the drawer guide opposite the hinge. For tall
and drawer models, the rating plate is located inside the
cabinet, to the left of the upper drawer. Refer to the illustra-
tions below.
If service is necessary, contact your authorized Sub-Zero
dealer.
INTEGRATED REFRIGERATION
Contents
2 Integrated Refrigeration
3 Opening Dimensions
3 Electrical
4 Plumbing
4 Preparation
4 Anti-Tip Bracket
5 Placement
5 Alignment
6 Water Line
6 Custom Panels
7 Panel Installation
8 Completion
Tools and Materials
• Screwdrivers—standard, Phillips and Torx.
• Power drill.
• Drill bits (masonry bits required for concrete installation).
• Standard socket and wrench set.
• .6 m and 1.2 m levels.
• Tubing cutter.
• .9 m of
1
/4" OD copper, braided stainless steel or
PEX tubing.
• Saddle valve.
• Material to protect home, ooring and cabinetry during
installation.
Important Note
To ensure this product is installed and operated as safely
and efciently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
Column models. Tall and drawer models.
RATING
PLATE
RATING
PLATE

Sub-Zero CBIC-18FI Specifications

General

Brand	Sub-Zero
Model	CBIC-18FI
Category	Refrigerator
Language	English