4. Select a number by operating the “ ”
or “
” switch. Then push the button.
When “12 h” is selected, the clock will be
set to a 12-hour display. When “24 h” is
selected, the clock will be set to a 24-hour
display.
5. After entering the date and time, select
“Set” by operating the “
” switch and
confirm the setting by pushing the
button.
6. The system will notify you that the
setting is complete.
! Birthday setting
1. Perform the preparation steps accord-
ing to “Preparation for date setting” F3-
64.
2. Operate the “ ” or “ ” switch to
select the “Birthday” item. Then push the
button.
3. Select an entry in the list to set by
operating the “
” or “ ” switch. Then
push the
button.
Instruments and controls/Multi function display
– CONTINUED –
3-65
To Next Page
