6. The system will notify you that the
setting is complete.
& Maintenance settings
The items in the maintenance settings can
be set. To change the items, operate the
“
” or “ ” switch.
! Preparation for maintenance set-
tings
1. Turn the ignition switch to the “ON”
position.
2. Push and hold the
button to show
the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Maintenance” item. Then, push the
button.
! Engine oil setting
1. Perform the preparation steps accord-
ing to “Preparation for maintenance set-
tings” F3-81.
2. Operate the “ ” or “ ” switch to
select the “Engine Oil” item. Then push
the
button.
3. Select the setting location (month, day,
year or distance) by operating the “
” or
“
” switch. Then push the button.
Instruments and controls/Multi function display
– CONTINUED –
3-81
To Next Page
Loading...
