EasyManua.ls Logo

Subaru WRX - Recommended Tire Inflation Pressure

Subaru WRX
586 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Consumer information and Reporting safety defects/Tire information
! Maximum load rating
The load rating at the maximum
permissible weight load for this tire.
For example, MAX. LOAD 580 kg
(1279 LBS) @ 300 kPa (44 PSI)
MAX. PRESS.
WARNING
Maximum load rating applies
only to the tire, not to the
vehicle. Putting a load rated
tire on any vehicle does not
mean the vehicle can be
loaded up to the tires rated
load.
! Constructi on type
Applicable construction of this tire.
For example, TUBELESS STEEL
BELTED RADIAL
! Constructi on
The generic name of each cord
material used in the plies (both
sidewall and tread area) of this tire.
For example, PLIES: TREAD 2
STEEL + 2 POLYESTER SIDE-
WALL 2 POLYESTER
! Uniform Tire Quality Grading
(UTQG)
For details, refer to Uniform tire
quality grading standards F13-15
.
& Recommended tire inflation
pressure
! Recommended cold tire infla-
tion pressure
For recommended cold tire inflation
pressure for your vehicles tires,
refer to Tires F12-8
.
! Vehicle placard
The vehicle placard is affixed to the
drivers side B-pillar.
Example:
The vehicle placard shows original
tire size, recommended cold tire
inflation pressure on each tire at
maximum loaded vehicle weight,
seating capacity and loading infor-
mation.
! Adverse safety consequences
of under-inflation
Driving at high speeds with exces-
sively low tire pressures can cause
the tires to flex severely and to
rapidly become hot. A sharp in-
13-4

Table of Contents

Other manuals for Subaru WRX

Related product manuals