Instruments and controls/Multi function display
“ ” switch, and confirm the setting by
pushing the
button.
6. The system will notify you that the
setting is complete.
! Language setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-73.
2. Operate the “ ” or “ ” switch to
select the “Languages” item. Then push
the
button.
3. The current language setting will be
displayed. Push the
button to enter
the language selection mode.
4. Select the preferred language by
operating the “
” or “ ” switch. Then
push the
button.
5. Select “Set” by operating the “ ”
switch and confirm the setting by pushing
the
button.
3-80
To Next Page
Loading...
