Instruments and controls/Multi function display
! Daylight saving time setting
1. Perform the preparation steps accord-
ing to “Preparation for date setting” F3-
64.
2. Operate the “ ” or “ ” switch to
select the “Daylight Saving Time” item.
Then push the
button.
3. The current setting will be displayed.
Push the
button to enter the selection
mode.
4. Select “On” or “Off” by operating the
“
” or “ ” switch. Then push the
button.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pushing
the
button.
6. The system will notify you that the
setting is complete.
3-70
To Next Page
