! Triple meter setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-73.
2. Operate the “ ” or “ ” switch to
select the “Triple Meter” item. Then push
the
button.
3. Select the setting location (left, center
or right) by operating the “
” or “ ”
switch. Then push the
button.
NOTE
The same item cannot be selected for
the left, center or right location.
4. Select the preferred item by operating
the “
” or “ ” switch. Then push the
button.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select “Set” by operating the “ ”
Instruments and controls/Multi function display
– CONTINUED –
3-77
To Next Page
