Instruments and controls/Multi function display
! Keyless buzzer volume setting
1. Perform the preparation steps accord-
ing to “Preparation for car settings” F3-85.
2. Operate the “ ” or “ ” switch to
select the “Keyless Buzzer Volume” item.
Then push the
button.
3. Select a volume level by operating the
“
” or “ ” switch, and confirm the setting
by pushing the
button.
4. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
! Hazard warning flasher setting
1. Perform the preparation steps accord-
ing to “Preparation for car settings” F3-85.
2. Operate the “ ” or “ ” switch to
select the “Hazard Warning Flasher” item.
3-86
To Next Page
Loading...
