Subaru WRX - Page 284

! “Balance/Fader”
A good balance of the left and right stereo
channels and of the front and rear sound
levels is important for good quality audio
program listening.
Keep in mind that when listening to a
stereo recording or broadcast, changing
the right/left balance will increase the
volume of 1 group of sounds while
decreasing the volume of another.
Touch the “Set” key of the “Balance/Fader”
key. The “B alance/Fader” screen will
appear.
. Volume Balance setting
1. Select the “Volume Balance Control”
key.
2. Adjust the balance by pressing “ ” or
“
” key.
3. Adjust the fader by pressing “
” or
“
” key.
. Vocal image setting
1. Select the “Vocal Image Control” key.
2. Adjust the balance by pressing “ ” or
“
” key.
3. Adjust the fader by pressing “
” or
“
” key.
Audio/Audio set
– CONTINUED –
5-21