SubGear XP10 - Diving with the XP10 Dive Computer

17
English
III Diving with XP10
III Diving with XP10
1 Terminology / Symbols
The information on the display of XP10 varies depending on the kind of dive and the dive phase.
1.1 General terminology / Display during no-stop phase
%
CNS O
2
%
DEPTH
NO STOP
DIVE T IME
Current depth
In metres (feet)
Dive time
Duration of
the dive (min)
No-stop phase
Dive phase during which surfacing is allowed
without stop.
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
Nitrogen loading
bar
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min)
Max depth
Max depth
reached during
the dive
Oxygen toxicity
CNS O
2
%
Ascent rate
(Only while
ascending)
Time
Current depth
24min
No-stop time
26.2m Max depth
37min dive time
Elapsed bottom time
Depth
(Max depth >) Temperature
> Temperature , O
2
mix and time of day
> (Max depth)…
1.2 Display during decompression phase
STOP
NO
DECO
CNS O
2
%
DEPTH
DIV E TI ME
Decompression stop
All required decompression
stops must be observed.
Decompression
stop depth
Deepest stage is
displayed.
Total ascent time to surface (7min)
Time
35.7m
No-stop range Decompression range
Deepest
decompression
stop depth
2min
Decompression
stop duration
6m
3m
Depth
Decompression stop
duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
Total ascent time
Including decompression
stops in minutes.