SECTION 2 Engine and Gearbox
Estimated date of delivery
Engine Jaguar XK / XJ donor/ VSE
Engine size : spec :
Engine mounting rubbers x2
Engine mounting brackets x 2 + Rear steady bar, brackets and bushes
Alternator or Dynamo bracket + adjuster
Starter motor inertia /pre-engaged
D type Plug Lead Holder, Plug leads, Extra long king lead.
Radiator alloy C type replica + 15lb Cap + overflow hose
Radiator Stays + fitting kit
Fan controller switch (built into radiator)
Distributor (fitted to engine) Points or Electronic
Carburettors–twin HS8 SU’s or Triple Weber with Airbox&filter or Trumpets
Inlet Manifold to suit carbs + thermostat housing
Throttle linkage to suit carbs
Choke cable to suit carbs
Exhaust Manifolds x 2 + gaskets x4 & Alloy body shield Stainless option Y / N
Exhaust Pipes x2 + Twin Silencer + brackets, clamps, 3 cotton reels
Cam covers. alloy smooth type (fitted to engine) __Badges __Breathers
Oil Filler Cap on cam cover Jaguar alloy (fitted to engine)
Oil Filter assembly (fitted to engine)
Oil Catch Tank (Weber only) + flex alloy Pipes
Flywheel (fitted to engine)
Gearbox type Gearbox overhaul
Gearbox mounting rubber + adaptor
Modified Bell housing + lower cover
Clutch Assembly + driven plate (fitted to engine)
Clutch Fork & carbon thrust
Clutch Slave Cylinder + banjo connector
Fuel Pipe kit inc. braided hoses + clips
Water pump w/pulley (xj6) and Single (narrow fit) crankshaft pulley
Delivery Diesel or courier costs: Date:
Any items not ticked in the SUPPLIED column are out of stock and will follow ASAP.
To Next Page
Loading...