C-type – RUBBER & POLYBUSH TYPES & POSITIONS:
FRONT LR WISHBONE SHAFT TO CHASSIS
(REAR BUSHES NEED TO BE MACHINED TO FIT)
REAR TRAILING ARM PIVOT TO CHASSIS
FRONT UPR WISHBONES TO MOUNTING BRKT
FRONT ANTI ROLL BAR TO CHASSIS
(DEPENDING ON BAR DIAMETER)
REAR TRAILING ARM TO AXLE
(BUSH ENDS MACHINED TO FIT)
ENGINE STEADY LINK TO ENGINE
FRONT ANTI ROLL BAR LINK TO WISHBONE
FRONT ANTI ROLL BAR TO LINK
(DEPENDING ON BAR TYPE)
ENGINE STEADY LINK TO CHASSIS
ENGINE FRONT MOUNTS TO CHASSIS
To Next Page
Loading...