Sullair SXT - Target Audience and Personnel; Responsibilities of the Operator

COALESCING FILTERS User Manual | US-EN
11
02250247-389 R02
Subject to EAR. EAR99 and related export control restrictions.
1.7 Target audience and personnel
This manual is directed towards the following professional technicians assigned to work on the lter or accessories.
INFORMATION Personnel requirements
i
Personnel may not complete any work on or with the lter or accessories if they are under the
inuence of drugs, medications, alcohol or other substances that could impair their awareness.
Professional technicians - Transport and storage
Transportation and storage technicians are personnel whose training, professional experience and qualications
have given them all the skills necessary to safely complete any actions associated with transportation, to recognize
potential hazards independently and take measures to prevent those hazards.
These skills include, in particular, experience in handling hoists, forklifts and lifting equipment and devices as well as
an understanding of regional applicable laws, standards and directives related to transportation and storage.
Compressed technology technicians
Compressed technology technicians are personnel whose training, professional experience and qualications have
given them all the skills necessary to safely complete any actions associated with compressed and pressurized
systems, to recognize potential hazards independently and take measures to prevent those hazards.
These skills include, in particular, experience in handling measurement, control and regulation technology as well as
an understanding of regional applicable laws, standards and directives related to compressed technology.
1.8 Responsibilities of the operator
The responsible operator must ensure the following to avoid accidents, faults and environmental impacts:
• Check before all actions whether this manual matches the product.
• Ensure the product is used, maintained, and repaired properly.
• Ensure that all applicable legal specications, safety provisions and accident prevention regulations are complied
with.
• Ensure that all specications and operating instructions for safe work and instructions for how to respond to
accidents and res are accessible at the work site to personnel at all times.
• Ensure the product is used with recommended and functional safety equipment and that this equipment has not
been deactivated.
• Ensure all assembly, installation and maintenance work is only carried out by qualied professional technicians.
• Ensure the recommended personal protective equipment is available and is used.
• Ensure suitable technical safety measures are taken to ensure the permitted operating parameters are not exceeded
and are met.