Sullair SXT - Critical Safety Instructions

COALESCING FILTERS User Manual | US-EN
13
02250247-389 R02
Subject to EAR. EAR99 and related export control restrictions.
2.2 Safety instructions
Always observe the safety and warning information provided to avoid accidents, personal injury and property damage,
and operational disruptions.
The personal protective equipment indicated in the safety information must be selected by the operator based on the
system parameters and properties and must be provided.
DANGER Operating outside of permitted limit values!
Operating the product outside of the permitted limit values and parameters and prohibited
modications and changes pose the risk of death or a hazard of severe injuries.
• Observe the limit values, operating parameters and maintenance intervals and set-up and
ambient conditions indicated on the type plate and in the manual to ensure safe operation of
the product.
• Check whether operating parameters are changed or restricted through the use of
accessories.
• Only use the product according to its intended use.
DANGER Pressurized system!
The risk of death or severe injuries exists in case of contact with fast or sudden exiting
compressed air or due to bursting system parts.
• Only work on the system when it is depressurized and secure the system against unintended
restart.
• Set up a safety zone around the system when carrying out any assembly, installation,
maintenance and repair work.
• Before pressurizing the system, check and tighten all pipe connections.
• Pressurize the system slowly.
• Avoid pressure surges and high pressure dierentials.
• Install all pipelines without mechanical tension. Avoid vibrations occurring in the pipeline
network by using vibration dampers.
• Carefully observe the installation and operating instructions in this manual.
• Carefully observe inspection and maintenance intervals.
• Permanently install inlet and outlet lines.
• Do not make modications on the product.
DANGER Use of incorrect replacement parts, accessories or installation materials!
The use of incorrect replacement parts, accessories or installation material or operating and
auxiliary materials may result in death or severe injuries. This may also cause functional or
operating disruptions or material damage.
• Only use undamaged original parts, auxiliary and operating materials for all installation and
maintenance work as indicated by the manufacturer.
• Only use ttings and connection elements permitted for the specic application and suitable
tools in proper condition.
• Only use cleaned pipelines free from dirt and corrosion.
WARNING Failure to use personal protective equipment!
The failure to use personal protective equipment or the use of defective personal protective
equipment may result in accidents or injuries while working on the product.
• Wear personal protective equipment recommended for the specic task in proper condition
when completing any work on the product.
• Regularly check personal protective equipment for proper function and replace damaged
parts promptly.
WARNING Insucient qualication!
If personnel have insucient qualications, this may result in accidents, personal injury and
property damage as well as operating disruptions while working on the product.
All work on the product may only be carried out by suciently qualied professional technicians.