User Manual | US-EN COALESCING FILTERS
44
02250247-389 R02
Subject to EAR. EAR99 and related export control restrictions.
11.2 Disassembly work
The following requirements must be fullled to carry out disassembly work and preparatory work must be completed.
Preconditions
Tool Material Protective equipment
• Screwdriver - Phillip's head size
0.10 inch (2.5 mm)
• none • Protective gloves (liquid-
resistant)
• Safety glasses with side
protection (goggles)
• Hearing protection
• Class FFP 3 respirator
• Safety shoes
Preparatory work
1. Open any bypass lines
Picture Description
1. 1.
1. Close the shut-o valves upstream and downstream
of the lter of the system section in question,
depressurize the lter and secure the system against
unintended pressurization
2. If using the SULLIMAX™, it must be separated from
the bottom section of the lter
For further information, see the attached installation and
operating instructions for the SULLIMAX™
To Next Page
Loading...
