Sullair SXT - Cleaning Work; Visual Inspection

COALESCING FILTERS User Manual | US-EN
33
02250247-389 R02
Subject to EAR. EAR99 and related export control restrictions.
9.2.2 Cleaning work
The following requirements must be fullled to carry out cleaning work and preparatory work must be completed.
Preconditions
Tool Material Protective equipment
• none • Mild cleaning agent
• Cotton or disposable cloth
• Protective gloves (liquid-
resistant)
• Safety glasses with side
protection (goggles)
• Hearing protection
• Class FFP 3 respirator
• Safety shoes
To clean the lter, use a damp (but not wet) cotton cloth or disposable tissue and a mild conventional detergent or soap.
1. Spray the cleaning agent on a new cotton or disposable cloth
2. Rub over the entire component
3. Then dry the device with a clean cloth or let it dry at room temperature.
9.3 Visual inspection
A visual inspection of the lter must be completed to check all components for mechanical damage and corrosion.
Damaged components must be exchanged promptly.