COALESCING FILTERS User Manual | US-EN
41
02250247-389 R02
Subject to EAR. EAR99 and related export control restrictions.
12. If using the SULLIMAX™, it must be connected once
again.
For further information, see the attached installation and
operating instructions for the SULLIMAX™
13. 13.
13. Slowly open the shut-o valves upstream and
downstream of the lter or relevant system section
9.6 Leak test
The leak test is a non-destructive testing method and is used to prove the leak tightness of vacuum and
overpressurized systems. The leak test can be completed in dierent ways. Sullair Corporation does not provide any
recommendations. The operator of the compressed system is responsible for selecting the testing process, and testing
should be completed in accordance with applicable standards and directives (e.g. DIN EN 1779).
To Next Page
Loading...
