Section 3
73
TS20C USER MANUAL
SPECIFICATIONS
3.1 TABLE OF SPECIFICATIONS—TS-20C
3.2 TABLE OF SPECIFICATIONS—V200TS
3.3 COMPRESSOR SPECIFICATIONS
Model HP Hz
DIMENSIONS
Length Width Height (I) Weight (II)
in mm in mm in mm lbs kg
TS-20C 100 60 120 3048 72 1828.8 68 1727.2
7350 3333.9
TS-20C 125 60 120 3048 72 1828.8 68 1727.2
7600 3447.3
TS-20C 150 60 120 3048 72 1828.8 68 1727.2
7900 3583.4
TS-20C 200 60 120 3048 72 1828.8 68 1727.2
8100 3674.1
TS-20C 250 60 120 3048 72 1828.8 68 1727.2
8450 3832.9
(I) 78 in/198 cm required to service separator filter elements.
(II) With enclosure
Model HP Hz
DIMENSIONS
Length Width Height (I) Weight (II)
in mm in mm in mm lbs kg
V200TS 100 60 120 3048 72 1828.8 68 1727.2
7675 3333.9
V200TS 125 60 120 3048 72 1828.8 68 1727.2
7975 3447.3
V200TS 150 60 120 3048 72 1828.8 68 1727.2
8375 3583.4
V200TS 200 60 120 3048 72 1828.8 68 1727.2
8550 3674.1
(I) 78 in/198 cm required to service separator filter elements.
(II) With enclosure
COMPRESSOR: STANDARD MODELS:
Type: Rotary Screw
Standard Operating Pressure (III): see Specifications
Bearing Type: Anti-friction
Ambient Temperature (Max.) (IV): 104ºF (40ºC)
Cooling: Pressurized Fluid
Lubricant: Sullube 32
Sump Capacity: 20 gallons
Control: Supervisor
(III) Special compressors are available for operation at higher pressures.
(IV) Special compressors are available for operating in higher ambient temperatures.