F Series Manual
9
1.1.1.6 Personal protective equipment
The required safety equipment depends on the installed modules and the material that needs
to be cut/milled.
During operating or servicing the machine the operator should wear close-fitting clothing and
use appropriate protective equipment.
Appropriate protective equipment can include:
• Work clothes.
• Goggles because when processing the material large particles can be generated.
• Ear protection if the continuous sound level pressure is above 80dB.
There is a risk of injury from being caught or trapped in moving
machine parts. Keep hands, hair, clothing and jewelry away from moving parts. Do
not wear jewelry, loose clothing, scarves or open jackets or shirtsleeves.
1.1.2 Operating environment
Environmental conditions can significantly affect the machine’s performance. Most
restrictions or recommendations for the ideal operating environment are already described in
the site preparation document. The environmental conditions of the machine (without media)
are as follows:
35 - 75 %, non-condensing
35 - 75 %, non-condensing
It is possible that the environmental conditions of the used media are stricter than those of
the machine itself. Please refer to the documentation about the used media.
Also, make sure that the media has had enough time to acclimatize.
To Next Page
Loading...
