Summa F1612 - Load; Menu; Events

F Series Manual
22
3.1.6 Load
With this menu, media is loaded.
3.1.7 Menu
With this menu, the standard parameters for the cutting table can be changed. Select the
parameter that needs to be changed. Then use the up/down arrow to change the value. The
software for sending jobs may overwrite some of the parameters.
3.1.8 Events
This menu shows all the messages that have been displayed by the flatbed cutter.
There are three types of messages:
Info: This s a message of the machine to the user.
Warning: This is a message, reminding the user a certain action needs to be taken.
Error: This is a message, reporting an error that needs the user’s attention.