Summa SummaSign T1010 PLUS - Page 10

INTRODUCTION
1. OVERVIEW
This is the Summa Service Manual for the SummaSign series cutters. It provides
information for servicing the cutters. All repairs are to be made by, or under the
direction of, authorised Summa service personnel.
This manual is copyrighted by Summa 1999. Summa reserves the right to change any
information contained in this manual without prior notice. Unauthorised copying,
modification, distribution, or display is prohibited. All rights reserved.
2. MANUAL ORGANIZATION
This manual is divided into the following sections:
 Table of Contents
 Introduction
 Keyboard controls
 General replacement guidelines
 Maintenance
 Calibration
 Troubleshooting
 Figures - part numbers
 List recommended spare parts
Keyboard control contains the following:
INTRODUCTION I-1