Sumvision Cyclone MKV 2 - Video System and Resolution Selection

Cyclone MKV 2 Multimedia Enclosure
Page 41.
Version 1.2
To adjust contrast levels use the NAVIGATION buttons to select the desired
level.
Hue:
This function allows a user to adjust video output hue levels.
To adjust hue levels use the NAVIGATION buttons to select the desired level.
Saturation:
This function allows a user to adjust video output saturation levels.
To adjust saturation levels use the NAVIGATION buttons to select the desired
level.
Digital Noise Reduction:
This feature helps reduce the amount of image noise that may occur during
video playback. However results may vary depending on the video file.
This function can be activated or deactivated by selecting ON or OFF.
Video System:
This function allows you to select the TV system or screen resolution.
To select different TV systems and resolutions, use the NAVIGATION buttons.
HDMI Auto Select this option when connected to a TV via HDMI cable.
When this option is selected, the MKV 2 will automatically
select the correct display resolution for your TV.
NTSC Select this option when connected to a standard analogue
TV system.
For America and Pacific countries.
PAL Select this option when connected to a standard analogue
TV system.
For European countries.
480p Select this option for an output resolution of 710.85 x 486.
576p 50Hz Select this option for an output resolution of 720 x 576.
720p 50Hz Select this option for an output resolution of 1080 x 720
with a frame rate of 50 hertz.
720p 60Hz Select this option for an output resolution of 1080 x 720
with a frame rate of 60 hertz.