Sun Microsystems Sun Blade 2500 - Setting Up the Sun Blade 2500 Workstation; Safety and Compliance Information; Planning the Installation Process

1
CHAPTER
1
Setting Up the Sun Blade 2500
Workstation
This chapter includes information about the following topics:
■ Safety and Compliance Information
■ Planning the Installation Process
■ Unpacking the Workstation
■ Cabling the Workstation
■ Powering On the Workstation
■ Powering Off the Workstation
Safety and Compliance Information
Read the document, Important Safety Information for Sun Hardware Systems (816-7190).
The document is included with the Sun Blade 2500 workstation.
More safety and compliance information can be found in the Sun Blade 2500 Safety
and Compliance Guide (817-5120). This guide is available online at:
http://www.sun.com/documentation/
Planning the Installation Process
Use the following flowchart as a process tool to assist you with installation of the
Sun Blade 2500 workstation.