Sun Microsystems Sun Blade 2500 - Cabling the Workstation

Chapter 1 Setting Up the Sun Blade 2500 Workstation 7
Cabling the Workstation
FIGURE 1-6 illustrates the cable connections for the workstation.
FIGURE 1-6 Cabling the Sun Blade 2500 Workstation
Connect the workstation and external devices in this order (FIGURE 1-6):
1. Connect the workstation power cord to a grounded electrical outlet.
2. Connect the keyboard and mouse to the on-board USB 1.1 connectors (the
connectors near the fan
FIGURE 1-4).
~
~