35
CHAPTER
4
Troubleshooting and Technical
Support
This chapter contains information to help you troubleshoot minor workstation
problems.
This chapter includes information about the following topics:
■ Troubleshooting the Sun Blade 2500 Workstation
■ How to Get Technical Assistance
Troubleshooting the Sun Blade 2500
Workstation
If you experience problems while setting up your workstation, refer to the
troubleshooting information in
TABLE 4-1.
TABLE 4-1 Troubleshooting Procedures
Symptom Troubleshooting
Workstation powers on,
but the monitor does
not.
1. Is the Power button for the monitor turned on?
2. Is the monitor power cord connected to a wall outlet?
3. Does the wall outlet have power? Test by plugging in another device.
System stops booting
after the ok prompt is
displayed.
At the ok prompt type: boot
If the system does not boot, contact your system administrator or a Sun Service
Support Center.
To Next Page
Loading...
Need help?
General
