ioxadm(8)
88 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
EXAMPLE 8 Displaying Locator LED Status for the External I/O Expansion Unit
If the FRU service indicator is already on due to a detected fault condition, only the
box locator LED will be set to fast.
EXAMPLE 9 Enabling the Indicator for Power Supply 1 When Power Supply 1 Has a Fault
Indication
The External I/O Expansion Unit chassis white LED has an integrated push button.
The button can be used to toggle the state of the chassis white locator LED between
off and fast. If the push button is used to turn off the locator LED, fast blink FRU
service LEDs are cleared.
EXIT STATUS The following exit values are returned:
XSCF> ioxadm locator iox@12B4
Location Sensor Value Resolution Units
IOX@12B4 LOCATE Fast - LED
IOX@12B4/PS0 SERVICE Fast - LED
XSCF>
ioxadm locator on iox@x031/ps1
XSCF> ioxadm locator
Location Sensor Value Resolution Units
IOX@X031 LOCATE Fast - LED
XSCF> ioxadm env -1 iox@x031/ps1 SERVICE
Location Sensor Value Resolution Units
IOX@X031/PS1 SERVICE On - LED
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
