showssh(8)
System Administration 441
NAME showssh - display the settings of the Secure Shell (SSH) service that configured for
the XSCF network
SYNOPSIS showssh [-c hostkey][-M]
showssh -c pubkey [-u user_name][-M]
showssh -h
DESCRIPTION showssh(8) command displays the current settings of the SSH service that
configured for the XSCF network.
The following information is displayed:
When specified the display of user public key, the user public key number, which
automatically numbered by system, and the user public key are displayed.
Only SSH2 is supported for XSCF.
Privileges You must have one of the following privileges to run this command:
â– To display the user public key of other user account:
useradm
â– To display the information other than above:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
SSH status Validity of the SSH service
SSH DSCP Whether the access from domain to the SSH service via the
Domain - SP Communication Protocol (DSCP) is permitted
RSA key Host public key in RSA format
DSA key Host public key in DSA format
Fingerprint Host public key in fingerprint format
-c hostkey Displays a host public key. If the -c option is omitted, "-c
hostkey" is assumed specified.
-c pubkey Displays the user public key. If the -c option is omitted, "-c
hostkey" is assumed specified
To Next Page
Loading...
Need help?
General
