showresult(8)
System Administration 423
NAME showresult - display the exit status of the most recently executed command
SYNOPSIS showresult
showresult -h
DESCRIPTION showresult(8) command displays the exit status of the most recently executed.
showresult(8) is convenient for a remote control program to confirm whether the
most recently executed command is successfully completed.
Privileges No privileges are required to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXAMPLES
EXAMPLE 1 display the exit status of setupfru(8).
EXIT STATUS The following exit values are returned:
-h Displays usage statement.
XSCF> setupfru -x 1 sb 0
XSCF> showresult
0
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
