Sun Microsystems Sun SPARC Enterprise M4000 Reference Manual

showlogs(8)
System Administration 385
NAME showlogs - display the specified log
SYNOPSIS showlogs [-t time [-T time]|-p timestamp][-v | -V | -S][-r][-M] error
showlogs [-t time [-T time]|-p timestamp][-v][-r][-M] event
showlogs [-t time [-T time]] [-r][-M]{power | env}
showlogs [-r][-M] monitor
showlogs -d domain_id [-t time [-T time]] [-r][-M]{console | ipl | panic}
showlogs -h
DESCRIPTION The showlogs(8) command displays the specified log.
Log data is displayed in the order of timestamps, starting from the oldest data by
default. Depending on the target for the log collection, the following logs can be
specified:
Privileges You must have one of the following privileges to run this command:
■ Error log, Event log, Temperature and humidity record, and Monitor message
log:
platadm, platop, fieldeng
■ Power log:
platadm, platop, domainadm, domainmgr, fieldeng
■ Scan log:
fieldeng
■ Console message log, Panic message log, and IPL message log:
platadm, platop, domainadm, domainmgr, domainop, fieldeng
Refer to setprivileges(8) for more information.
For Field Replaceable Unit (FRU)
■ Error log (sometimes includes scan log)
■ Power log
■ Event log
■ Temperature and humidity record
■ Monitoring message log
For domain
■ Console message log
■ Panic message log
■ IPL message log

Sun Microsystems Sun SPARC Enterprise M4000 Specifications

General

Brand	Sun Microsystems
Model	Sun SPARC Enterprise M4000
Category	Server
Language	English