reset(8)
System Administration 123
EXAMPLE 3 Resets domain ID 0. Suppresses prompts, and automatically answers "y" to
all prompts.
EXAMPLE 4 Cancels the reset command execution that is in progress.
EXIT STATUS The following exit values are returned:
SEE ALSO poweroff(8), poweron(8), setdomainmode(8), showdomainstatus(8)
*Note*
This command only issues the instruction to reset.
The result of the instruction can be checked by the "showlogs power".
XSCF>
reset -q -y -d 0 por
XSCF> reset -d 0 panic
DomainID to panic:00
Continue? [y|n]:n
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
