setsnmp(8)
System Administration 253
EXAMPLES EXAMPLE 1 Setting Up System Information
EXAMPLE 2 Setting Up and SNMPv3 Trap Host With Password Options
EXAMPLE 3 Setting Up and SNMPv3 Trap Host without Password Options
EXAMPLE 4 Starting the Agent
EXIT STATUS The following exit values are returned:
SEE ALSO setsunmc(8), showsnmp(8)
XSCF> setsnmp -l sandiego -c username@company.com -d ff1
XSCF> setsnmp addv3traphost -u jsmith -n 0x### -r SHA -a xxxxxxxx
-e yyyyyyyy fiche
XSCF> setsnmp addv3traphost -u bob -i -r SHA fiche
Authentication Password:
Encryption Password:
XSCF> setsnmp enable SP_MIB
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
