showdevices(8)
System Administration 333
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
You can execute the showdevices(8) command under the environment where the
following services, managed by the Solaris Service Management Facility (SMF), are
in operation:
■ Domain SP Communication Protocol (dscp service) is working properly and the
network with XSCF has been established
■ Domain Configuration Server (dcs service) is working properly
■ Sun cryptographic key management daemon (sckmd service) is working
properly
EXAMPLES
EXAMPLE 1 Displays the information of the physical devices configured on the XSB#00-0
and their available resources.
-p force Predicts system resources deleted from the Solaris OS when an
XSB is forcibly disconnected by "deleteboard -f" command. If
the -p option is omitted, "-p bydevice" is used.
-p query Predicts system resources deleted from the Solaris OS when an
XSB is disconnected by deleteboard command. If the -p option
is omitted, "-p bydevice" is used.
-v Displays information on all I/O devices, including those that are
not management targets. As information on the I/O devices that
are not management targets, however, only physical
configurations are displayed, and resources and use states are not
displayed.
xsb Specifies the XSB number for which information is to be
displayed. The following xsb form is accepted:
x–y
where:
x An integer from 00–15.
y An integer from 0–3.
XSCF> showdevices 00-0
CPU:
----
DID XSB id state speed ecache
To Next Page
Loading...
