showfru(8)
358 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008
OPERANDS The following operands are supported:
EXTENDED
DESCRIPTION
The setupfru(8) command makes hardware settings for a device.
EXAMPLES EXAMPLE 1 Displays the settings of all PSBs.
EXIT STATUS The following exit values are returned:
SEE ALSO addboard(8), deleteboard(8), moveboard(8), setdcl(8), setupfru(8),
showboards(8), showdcl(8), showdevices(8)
device Specifies the device to display. Currently, only the following
device can be specified:
sb Physical system board (PSB)
location Specifies the location of device. If the device is "sb", an integer
ranging from 00 to 15 can be specified.
XSCF> showfru -a sb
Device Location XSB Mode Memory Mirror Mode
sb 00 Quad no
sb 01 Uni yes
sb 02 Quad no
sb 03 Uni no
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
