showtimezone(8)
452 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
â– When specified standard:
From: ddd MM dd hh:mm:ss yyyy dst
To: ddd MM dd hh:mm:ss yyyy dst
to-date[/time] The termination time of Daylight Saving Time.
Any of the following formats displays to-date.
Mm.w.d
Mm: Shows the month when Daylight Saving Time terminates.
Any numeric from 1 to 12 comes in m.
w: Shows the week when Daylight Saving Time terminates.
Any numeric from 1 to 5 comes in, "1" for the first week and
"5" for the last week in the month.
d: Shows the day of the week when start Daylight Saving Time
terminates. Any numeric from 0 to 6 comes in, "0" for Sunday
and "6" for Saturday.
Jn
Jn: The date when Daylight Saving Time terminates. Any
numeric from 1 to 365 comes in, "1" for January 1st. The leap-
year day is not counted.
n
n: The date when Daylight Saving Time terminates. Any
numeric from 1 to 365 comes in, "1" for January 2nd. The
leap-year day is counted.
In time, the time to switch from Daylight Saving Time is shown in
the pre-switched time.
hh:mm:ss Shows the time in "hh:mm:ss" format. The
default value is "02:00:00."
ddd a day of the week
MM month
dd day
hh hour
mm minutes
ss second
yyyy year
To Next Page
Loading...
Need help?
General
