flashupdate(8)
56 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
EXTENDED
DESCRIPTION
â– When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
â– When the firmware is updated, the XSCF unit is reset. Therefore, LAN
connection to the XSCF is canceled if already established.
â– When there's a faulty Field Replaceable Unit (FRU), can't update the firmware.
Resolve the FRU fault then update.
EXAMPLES
EXAMPLE 1 Check whether the entire firmware can be updated to version 1082.
EXAMPLE 2 Updates the entire firmware to version from 1080 to 1082.
-q Suppresses all messages to stdout, including prompts.
-s version Specifies an XCP comprehensive firmware version. For version,
specify a major version, minor version and micro version
continuously.
The XCP version number appears as xyyz by four digits, where:
x Major firmware release number
yy Minor release number
z Micro release number
-y Automatically answers "y" (yes) to all prompts.
XSCF> flashupdate -c check -m xcp -s 1082
XSCF> flashupdate -c update -m xcp -s 1082
The XSCF will be reset. Continue? [y|n] :y
XCP update is started (XCP version=1082:last version=1080)
OpenBoot PROM update is started (OpenBoot PROM version=02090000)
OpenBoot PROM update has been completed (OpenBoot PROM version=02090000)
XSCF update is started (XSCFU=0,bank=1,XCP version=1082:last version=1080)
XSCF download is started (XSCFU=0,bank=1,XCP version=1082:last
version=1080, Firmware Element ID=00:version=01080001:last
version=01080000)
XSCF download has been completed (XSCFU=0,bank=1,XCP version=1082:last
version=1080, Firmware Element ID=00:version=01080001:last
version=01080000)
:
To Next Page
Loading...
Need help?
General
