ioxadm(8)
80 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
OPTIONS The following options are supported.
OPERANDS The following operands are supported:
-f Forces command execution by ignoring warnings.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-M Displays text by page. This option provides a function that is the
same as that of the more command.
-p Parsable output. Suppresses headers in display output. Fields are
separated by single tabs.
-v Specifies verbose output. Refer to specific operands for details.
env [-elt][target [sensors]]
Displays a summary of an External I/O Expansion Unit or link card’s
environmental state.
â– -e
Displays electrical states: measured voltage, current, fan speed, switch
settings.
â– -l
Displays LED states.
â– -t
Displays thermal readings.
If no target is specified, env displays a list of all sensors for all External I/O
Expansion Units.
If target specifies a box_id, env displays a list of sensor readings for all frus in
the specified External I/O Expansion Unit and the attached downlink cards.
If target is in the form of box_id followed by fru, then only environmentals
from that FRU will be printed. If an optional value for sensors is specified,
then only those types of sensors are displayed. These options may be used
concurrently.
If target is in the form of a host path, only the downlink card information is
displayed. See EXAMPLE 2.
To Next Page
Loading...
Need help?
General
