Safety Instructions - VIII
Copyright(c) 2005, Sun Microsystems, Inc. All rights reserved.
Safety Instructions
Other
Do not try to move the monitor by pulling on the wire or the signal
cable.
This may cause a breakdown, electric shock or a fire due to cable
damage to the cable.
Do not move the monitor right or left by pulling only the wire or the
signal cable.
This may cause a breakdown, electric shock or a fire due to cable
damage to the cable.
Never insert anything metallic into the monitor openings.
This may cause an electric shock, fire or injury.
Keep the monitor away from any magnetic substances.
This may cause discoloring or distortion of the image.
To Next Page
Loading...
