User’s Manual - 30
Copyright(c) 2005, Sun Microsystems, Inc. All rights reserved.
Q & A
Highlight Zone Q & A
Question Answer
Started a multimedia program but the
Highlight Zone function does not
automatically activate.
Check the color settings and see if sRGB is selected.
When sRGB is selected, the Highlight Zone function
remains de-activated in order to maintain the sRGB color
attributes.
Changed the setting to Highlight Zone
in Manual Detect mode but the
Highlight Zone feature has not been
activated.
Check the color setting of the monitor and see if sRGB is
selected.
When sRGB is selected, the Highlight Zone function
remains de-activated in order to maintain the sRGB color
attributes.
When a Highlight Zone is on, the rest
of the screen dims.
Monitors with the Highlight Zone feature are equipped with
an Automatic Beam Control function. When activated, this
may cause slight dimming of the surrounding screen.
However, this does not indicate a malfunction of any kind,
and it is safe to continue to use the product.
The Highlight Zone appears too dark. Check the Contrast value in Picture Setting and adjust it for
your ideal viewing. You can also check the RGB values and
increase the values for a brighter Highlight Zone image.
Want to adjust the position and size of
the Highlight Zone.
You can change the position and/or the size of the
Highlight Zone easily using the Manual Detect function.
See (Highlight Zone functions)
Cannot select Picture Setting. The Picture Setting feature can be selected only when the
Highlight Zone function is on. Turn the Highlight Zone
function on before selecting Picture Setting.
To Next Page
Loading...
