User’s Manual - 38
Copyright(c) 2005, Sun Microsystems, Inc. All rights reserved.
Specification
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For energy
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long
periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your
computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation Power-off Mode EPA/
ENERGY 2000
Power Indicator
Green Green, Blinking
Power Consumption
Less than 130W Less than 2W
This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when
used with a computer equipped with VESA DPMS (Digital Power Management
System) functionality.
As an E
NERGY STAR® Partner, Sun Microsystems has determined that this product
meets the E
NERGY STAR ® guidelines for energy efficiency.
To Next Page
Loading...
