EasyManua.ls Logo

Sunbeam EMM7300 - Page 32

Sunbeam EMM7300
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Note: If the tablet has not been
dissolved, insert the Group Handle back
into the Group Head, empty the Drip
Tray & replace. Repeat the ‘Start the
Cleaning Cycle’ section.
• Cleaning Cycle Clean Up
- Purge the Group Head by pressing the
ONE CUP BUTTON and water should
flow.
- Allow water to run through until it stops.
- Wash the Drip Tray, Group Handle &
Cleaning Disc in warm water with a mild
detergent, rinse & dry.
Cleaning Steam Wand
• Every time
- Wipe the Steam Wand with a damp cloth.
(See Coffee Making Guide page 13).
- After texturing milk purge the Steam
Wand by turning the DIAL to HOT WATER
for just 1-2 seconds.
• 2-3 Months
- Soak the Steam Wand overnight in the
Milk Jug with warm water & one Cleaning
Tablet.
- In the morning remove the Jug and rinse
ensuring that all traces of the solution
have been removed.
- Wipe Steam Wand with a damp cloth
ensuring that all traces of the cleaning
tablet have been removed.
- Run Steam through the Steam Wand for
40 seconds.
• Unblocking Steam Wand
If the Steam Wand Tip becomes clogged
with milk residue:
- Insert the thicker ‘STEAM’ Cleaning Pin
up the Steam Wand Tip hole and remove.
- Run Steam through the Steam Wand for
40 seconds.
• If the Steam Wand remains blocked:
Unscrew the Steam Wand Tip and soak
overnight in the Milk Jug with warm water
& one Sunbeam Cleaning Tablet.
- In the morning rinse the Jug & Steam
Wand Tip under running water ensuring
all traces of the cleaning tablet have been
removed.
- Use the thicker ‘Steam’ Cleaning Pin to
clean the Steam Wand Tip.
- Ensure red O-ring is present &
undamaged.
- Screw the Steam Wand Tip back into the
Steam Wand Arm.
Care and cleaning – Espresso machine
ESPRESSO
MACHINE
CLEANING
TABLETS
STEAM
INSERT
UNSCREW

Related product manuals